Original post and credit to : Ronald PE2KMV https://www.pe2kmv.nl/wp/en/dmr-en/sms-functions-via-dmr/
The Brandmeister network has some functions to request information via SMS messages. To access these functions specific keywords are to be sent to DMR ID 262993. Then the system responds as well via SMS on these requests. Below you’ll find an overview of these commands with some explanation. The commands are not case sensitive.
| Command | Explanation |
|---|---|
| help | Shows an overview of the available functions |
| echo | Sends immediately a response to test the SMS function |
| wx | Weather at the repeater site |
| wx help | Overview of all available weather commands |
| wx Town | Weather in the city ‘Town’ |
| wx zip Town | Weather in the area ‘zip’ in the city ‘Town’ |
| wx zip, cc | Weather in the area ‘zip’ in country ‘cc’ |
| wx Town, cc | Weather in the city ‘Town’ in country ‘cc’ |
| wx zip Town, cc | Weather in area ‘zip’ in city ‘Town’ in country ‘cc’ |
| wx gps | Weather at the actual position of the DMR user according to the radio’s GPS |
| metar xxxx | METAR message at the airport identified by ICAO code ‘xxxx’ |
| gps help | Overview of all GPS commands |
| gps | Shows actual GPS position including the name of the location (street, city) of the DMR radio. Also direction and distance in relation to the actual repeater are provided |
| gps set | Stores the actual position as ‘Home’ location |
| gps home | Shows distance and direction of the actual position in relation to the previously stored ‘Home’ position |
| gps callsign | Shows distance and dire |
Furthermore it’s possible to route DMR messages into the DAPNet pager network. More information regarding DAPNet can be found at the website of Dutch Amateur Pagernetwork and RWTH Aachen (Aachen University). Messages for DAPNet are to be sent to DMR ID 262994.
A pager message for DAPNet is to be sent in the format [callsign] [message], for instance PX0XXX This is a message from DMR to DAPNet . This sends a messagetext ‘This is a message from DMR to DAPNet’ to user PX0XXX . Prerequisite is that ‘PX0XXX’ is a registered DAPNet user.